The Best Jeep Hood Louvers/Hood Vents Money Can Buy:

Overheating Jeeps are our main business! Designed with the help of a NASA Wind Tunnel Engineer, RunCool® Hood Louvers are the best-cooling and the best-looking Hood Louvers for all Jeeps. Click here to read all the details about Jeep Hood Louvers and get sizes and specs.

Customers Who Have Bought Our Hood Louvers Say:

"26 degree drop on the engine's temperature gauge! Now I can run the A/C without overheating! I stood back after I installed them and said, 'They really look sharp!' I hit on something good. They impressed me from the minute I opened the box!"
- Ken G., Idalia, Col., Jeep Cherokee

"I did a V-8 conversion on my Jeep, but it ran too hot. As soon as I put your hood louvers on, it immediately solved the problem." - Paul L., Minn.

"Your hood louvers are absolutely excellent! Install was straight forward, instructions were good, the louvers look great, and the temp of the Jeep XJ has dropped 20 degrees F. And that's on the temp gauge. The under hood temp dropped even more. Very pleased with the service, and responsiveness of your team, and your product." D.H. - Caytonsville, Md.

"The Size Large Louvers look good on my Wrangler -- but the best thing is they work well, too!" Justin F. - Mass.

"We like these vents because they are easy to install and they come powder-coated with clean-looking stainless steel pop-rivet fasteners."
Four Wheeler Magazine

"I recommend your hood louvers to my customers because they look good, and they work! 4x4 Dealer - Calif.

"I put a set of your Side Louvers on my Jeep TJ and they worked so well I'm now ordering a set of your Hood Louvers. This is my second order in just two weeks!"
David P. - Charlottesville, Va.

"It is UNBELIEVABLE how well they work. I would never believe the difference they could make. Your hood louvers are exceptional! The quality of your products far exceeded my expectations. The instructions are faultless, and installing them was easy." K.W. - Colo. (Search, Rescue and Recovery)

"Your instructions for installation were awesome, nice job. I painted the vents a matching House of Color Orange Pearl with a base underneath. Used 4 coats of clear coat to make them match the hood. Jeep is a '97, stretched frame, 41" IROKS, Dana 60 axles, Atlas Transfer, Chevy 5.7 V8...I could feel the heat from the vent coming out, and the hood was not hot to the touch anymore." T.W. - Ga.

"The 304 [in the Jeep] puts out a lot of heat and this is a great looking way to get rid of that heat." www.certifiablejeep.com

"We like these vents because they are easy to install and they come powder-coated with clean-looking stainless steel pop-rivet fasteners." Four Wheeler Magazine

"I installed the louvers on Tuesday, drove over to Moab, picked up some new tires on Thursday, followed a group of Goodyear tire testing vehicles through Pritchett Canyon on Friday, and returned home on Saturday. The louvers worked! Thank you so much." - Jim B., Ariz.

"I have some plastic hood louvers now -- what a pain! Once or twice each year I have to take them off and repaint them -- the paint is always flaking off, and that's after using special plastic paint! I'm ordering your powder-coated aluminum ones because I'm tired of messing around!" - Jeep Owner

Jeep Hood Vent Photos

Search Rescue Jeep with Hood Louvers Jeep Hood Louver Photo

Hood Louvers on a Jeep Side Louvers on a Jeep

Jeep Hood Vents Photo Black Hood Louvers Jeep

Hood Vents Jeep Photo Hood Vents Jeep Installation

Side Louvers Hood Scoop Installation

Premise: One of our customers sent in pictures of a different kind of application that he's using our hood louvers for. Please read the captions below for more information regarding this truly unique solution for his Jeep Cherokee.

#1

Here is my AIRAID cold air box/filter. It is open at the top and seals closed when the hood is shut.

#2

Here I draw the lines on my hood to show the general area where your Side Louvers will be installed in the reverse of the usual, with the louver openings facing forward to act as hood scoops taking in the ram air.

#3

The Side Louvers are just sitting in place in this photo. Notice I am putting them on "backwards" -- with the louvered opening forward to scoop in fresh air to my air filter. This makes a NOTICEABLE increase in power!!

#4

Per your instructions, I taped around the outside of the Side Louvers. I will make my cutout about 1/2" inboard of this outline.

#5

Here is an under-hood view of the installed louvers. We have many big insects in the desert, so I put a piece of screen in place to keep from scooping them in!

#6

This under-hood photo shows your Side Louvers and your Size Medium Hi-Flow Jeep Hood Louvers. As you can see, I could have used Size Large on my Jeep Cherokee, but I wasn't sure when I ordered.

#7

The top view with the hood closed - you can see into the Side Louvers from the front in this application.